"ingenieurswese biblioteek" "Biblioteka inxhinieri" "Engineering-Bibliothek" "тэхнічных бібліятэк" "инженерство библиотека" "la biblioteca de l'enginyer" "inženýrství knihovna" "工程库" "工程庫" "공학 도서관" "bibliyotèk Engineering" "inženjering knjižnica" "engineering bibliotek" "inžinierstva knižnica" "engineering knjižnica" "insener raamatukogu" "Engineering kirjasto" "Bibliothèque de génie" "llyfrgell peirianneg" "Biblioteca de Enxeñaría" "βιβλιοθήκη μηχανική" הספרייה הנדסה इंजीनियरिंग पुस्तकालय "engineering bibliotheek" "mérnöki könyvtár" "rekayasa perpustakaan" "engineering library" "leabharlann innealtóireacht" "Engineering Library" "Engineering Library" "エンジニアリングライブラリ" "inženierzinātņu bibliotēka" "technikos biblioteka" "инженеринг библиотека" "kejuruteraan perpustakaan" "librerija inġinerija" "engineering library" کتابخانه مهندسی "Biblioteka inżynierii" "Biblioteca de Engenharia" "biblioteca de inginerie" "технических библиотек" "инжењеринг библиотека" "uhandisi maktaba" "engineering bibliotek" "engineering library" ห้องสมุด วิศวกรรม "mühendisliği kütüphanesi" "технічних бібліотек" "kỹ thuật thư viện" אינזשעניריע ביבליאָטעק مكتبة الهندسة

viernes, 17 de septiembre de 2010

Videotutoriales de MathCad, funciones de una sola variable, evaluación númerica y representación gráfica.

AN Evaluación numérica de una función de una variable utilizando herramienta MathCad.














AN Gráfica de una función de una variable utilizando herramienta MathCad.

Videotutoriales de MathCad, Crear funciones, ecuaciones y representaciones gráficas.

Crear funciones, ecuaciones y representaciones gráficas.

sábado, 11 de septiembre de 2010

Curso, simulación de procesos en Aspen Hysys








INTRODUCCIÓN A ASPEN HYSYS® ......................................................................................... 3


¿QUÉ ES ASPEN HYSYS®? ....................................................................................................... 3

OBJETIVOS DEL CURSO ELECTIVO .......................................................................................... 3

INICIANDO ASPEN HYSYS® ..................................................................................................... 4

CONFIGURANDO LAS PREFERENCIAS DE LA SESIÓN ............................................................... 4

CREANDO UNA NUEVA SIMULACIÓN – SIMULATION BASIS MANAGER ................................... 5

ADICIONANDO COMPONENTES A LA SIMULACIÓN ....................................................................... 7

SELECCIONANDO UN PAQUETE DE FLUIDOS ................................................................................. 8

SELECCIÓN DEL MODELO TERMODINÁMICO ................................................................................9

ENTRANDO AL AMBIENTE DE SIMULACIÓN ......................................................................... 13

TRABAJANDO EN EL DIAGRAMA DE FLUJOS DE PROCESOS (PFD) ............................................... 13

VOLVIENDO A INGRESAR AL SIMULATION BASIS MANAGER ...................................................... 15

CERRAR ACCIDENTALMENTE EL PFD ...........................................................................................15

PALETA DE OBJETOS .................................................................................................................... 15

AGREGANDO CORRIENTES DE MATERIALES ................................................................................15

ESPECIFICANDO CORRIENTES DE MATERIALES ...........................................................................16

GUARDANDO LA SIMULACIÓN ........................................................................................... 19

FINALIZANDO LA INTRODUCCIÓN ....................................................................................... 19

APLIQUEMOS LO APRENDIDO ............................................................................................ 19

APLICACIONES ................................................................................................................... 20

BALANCES DE MATERIA Y ENERGÍA ..................................................................................... 20

BALANCES DE MASA SIN REACCIÓN QUÍMICA ............................................................................21

EJERCICIO Nº2 – TRABAJO PRÁCTICO Nº1 ..................................................................................21

BALANCES DE MASA Y ENERGÍA CON REACCIÓN QUÍMICA ......................................................... 26

EJERCICIO Nº2 – TRABAJO PRÁCTICO Nº5 ..................................................................................26

EJERCICIOS PROPUESTOS ............................................................................................................ 31

EJERCICIO Nº5 – TRABAJO PRÁCTICO Nº2 ..................................................................................31

EJERCICIO Nº4 – TRABAJO PRÁCTICO Nº5 ..................................................................................32

TERMODINÁMICA.............................................................................................................. 32

CICLO RANKINE ............................................................................................................................ 32

EJERCICIO Nº1 – TRABAJO PRÁCTICO Nº14 ................................................................................32

EJERCICIOS PROPUESTOS ............................................................................................................ 35

EJERCICIO Nº3 – TRABAJO PRÁCTICO Nº 16 (Ciclo frigorífico) .................................................... 35

OPERACIONES UNITARIAS I ................................................................................................ 35

INSTALACIONES DE BOMBEO ...................................................................................................... 35

EJERCICIO Nº1 – TRABAJO PRÁCTICO Nº5 ..................................................................................35

EJERCICIOS PROPUESTOS ............................................................................................................ 40

EJERCICIO Nº2 – TRABAJO PRÁCTICO Nº5 ..................................................................................40

TECNOLOGÍA DEL CALOR .................................................................................................... 41

VERIFICACIÓN (RATING) DE UN INTERCAMBIADOR ...........................................................41

EJERCICIO Nº4 – TRABAJO PRÁCTICO Nº5 .............................................................................. 41

EJERCICIOS PROPUESTOS ............................................................................................................ 45

OPERACIONES UNITARIAS II ............................................................................................... 46

DISEÑO DE UNA COLUMNA DE DESTILACIÓN..............................................................................46

EJERCICIO Nº5 – UNIDAD Nº2 ..................................................................................................... 46

DISEÑO DE UNA COLUMNA DE ABSORCIÓN DE GASES ............................................................... 55

EJERCICIO Nº4 – UNIDAD Nº4 ..................................................................................................... 55

EJERCICIOS PROPUESTOS ............................................................................................................ 57

EJERCICIO Nº4 – UNIDAD Nº2 ..................................................................................................... 57

EJERCICIO Nº8 – UNIDAD Nº4 ..................................................................................................... 57

CINÉTICA QUÍMICA Y CATÁLISIS .......................................................................................... 58

REACTOR TUBULAR DE FLUJO PISTÓN .........................................................................................58

EJEMPLO Nº4 – UNIDAD Nº4 (Apunte de cátedra) ..................................................................... 58

REACTOR TANQUE AGITADO ....................................................................................................... 66

EJEMPLO Nº2 – UNIDAD Nº3 (Apunte de cátedra) ..................................................................... 66

CONVERTIDOR AGUA-GAS .......................................................................................................... 70

EJERCICIOS PROPUESTOS ............................................................................................................ 75

EJEMPLO Nº3 – UNIDAD Nº4 (Apunte de cátedra) ..................................................................... 75

EJEMPLO 8-5 PRODUCCIÓN ADIABÁTICA DE ANHÍDRIDO ACÉTICO (ELEMENTOS DE INGENIERÍA

DE LAS REACCIONES QUÍMICAS – H. SCOTT FOGLER) ................................................................. 76
 

martes, 7 de septiembre de 2010

RECERCAT, repositorio cooperativo de documentos digitales.

RECERCAT es un repositorio cooperativo de documentos digitales que incluye la literatura de investigación de las universidades y de los centros de investigación de Catalunya, como artículos aun no publicados (preprints), comunicaciones a congresos, informes de investigación, working papers, proyectos de final de carrera, memorias técnicas, etc.









Universitat de Barcelona


Universitat Autònoma de Barcelona

Universitat Politècnica de Catalunya

Universitat Pompeu Fabra

Universitat de Girona

Universitat de Lleida

Universitat Rovira i Virgili

Universitat Oberta de Catalunya

Universitat de Vic

Universitat Internacional de Catalunya

Universitat Abat Oliba CEU

Generalitat de Catalunya

Agència de Gestió d'Ajuts Universitaris i de Recerca

Centres i instituts de recerca

Institucions culturals

Organismes i activitats interuniversitàries

sábado, 4 de septiembre de 2010

Videotutoriales de origin, Statistics

Analysis of Variance (ANOVA) v8.1

Learn how to perform One-Way and Two-Way Analysis of Variance (ANOVA) in Origin when your data are organized in two different ways.



OriginLab® Origin 8.1: Analysis of Variance (ANOVA)












Descriptive Statistics

Learn how to use the Descriptive Statistics tool to attain statistical information of groups of data, and use the report sheet generated for further analysis and plotting.

OriginLab® Origin 8.1: Descriptive Statistics Part1












OriginLab® Origin 8.1: Descriptive Statistics Part2












OriginLab® Origin 8.1: Descriptive Statistics Part3




2D Binning

ANOVA

Análisis de Supervivencia

Prueba

Videotutoriales de origin, Fitting

Quick Fit Gadget


Using the new Quick Fit Gadget, learn how to fit multiple ranges in a single plot in Part 1. In Part 2, learn how to fit multiple data plots and generate a worksheet with the results from each plot

OriginLab® Origin 8.1: Quick Fit Gadget Part 1 - Fitting Multiple Ranges of a Data Plot












OriginLab® Origin 8.1: Quick Fit Gadget Part 2 - Fitting Multiple Data Plots to Generate Report













Using Linear Constraints When Fitting

Learn how to enable constraints when fitting. You will learn the syntax for applying constraints to groups of parameters

OriginLab® Origin 8.1: Using Linear Constraints When Fitting












Introduction to Curve Fitting

Learn how to fit with a built-in fitting function and change the settings for the output curve to add more points. Also, learn how to define and fit with a user-defined function

OriginLab® Origin 8: Introduction to Curve Fitting













Nonlinear Curve Fitting

Learn how to graphically select the input data range to be fitted using the nonlinear curve fitter.

OriginLab® Origin 8.1: Nonlinear Curve Fitting













Selecting Data Range from Fitter

Learn how to change the data plot for fitting from inside the fitter tool, and then also how to change the fit data range of the current data plot by using change parameters

OriginLab® Origin 8: Select Data Range from Fitter












Fitting Multiple Peaks with Peak Analyzer

Learn how to find and subtract baseline and then find and fit peaks. You'll also learn how to use the recalculate feature to re-use the saved operation settings to fit new peak data of similar nature.

OriginLab® Origin 8: Fitting Multiple Peaks with Peak Analyzer












Masking Outliers

Learn how to mask faulty points or outliers to return better fitting results.

OriginLab® Origin 8: Handling Outliers by Masking Data Points






User-defined Fitting Functions

Linear Fitting

Fitting Replicate Data

Global Fitting

Outputting Results

Videotutoriales de origin, General Analysis

Batch Processing

Learn how to create an analysis template, and use this template to batch process multiple data files.

OriginLab® Origin 8.1: Batch Processing Part1 -Creating an Analysis Template













OriginLab® Origin 8.1: Batch Processing Part2 - Use Analysis Template for Batch Processing











Dose Response Analysis
NEW!

Learn how to custom plot legend, to use derived parameters to calculate EC50 or EC90 in dose response curve fitting and how to perform global fit by sharing parameters.

OriginLab® Origin 8.1: Dose Response Analysis






Creating an Analysis Template

Dialog Theme

Videotutoriales de origin, LabVIEW

Use Origin with LabVIEW™ for Real-time DAQ Data Analysis


Learn how to use Origin with LabVIEW for Real-time DAQ Data Analysis.


OriginLab® Origin 8: Use Origin with LabVIEW for Real time DAQ Data Analysis

Videotutoriales de origin, Graphing

Multi-Y Plots Using Templates

Learn how to quickly and easily create a multi-Y axis plot with axes and tick lable colors matching the plot color using pre-installed templates.

OriginLab® Origin 8:How to make a Multi-Y Plot using pre-installed templates.












Converting a Worksheet to Matrix Direct

Learn how to convert worksheet data to a matrix for Surface and Contour Plots, when x and y values are present in the first column and one of the column lable rows.

OriginLab® Origin 8: Converting a Worksheet to Matrix Direct












Customizing Data Points In a Graph

Learn how to customize a single data point in a scatter graph, column/bar plot and pie chart.

OriginLab® Origin 8: How to customize individual data point in a graph such as a pie slice





Add, remove or reorder data plots
 Learn how to easily add, remove or reorder dataplots.


 
 
Graph Template
Learn how to create a graph template and reuse it.


 
Graph Theme
Learn how to copy + paste graph formats and save the formats as Theme
 
 
Linking graph layers
Learn how to plot graphs from Plot Setup dialog, and then link the graph layers.


 

Managing Layers
Learn how to merge graphs and arrange the graph layers.

Videotutoriales de origin, Graphing

Customizing a Graph


Learn how to add a layer title, resize a layer, change the axes properties, save a graph as a template and reuse it, customize a graph by using theme, change the plotting order, customize a single data point or a grouped data plot.


OriginLab® Origin 8.1: Customizing a Graph Part1












OriginLab® Origin 8.1: Customizing a Graph Part2












OriginLab® Origin 8.1: Customizing a Graph Part3













OriginLab® Origin 8.1: Customizing a Graph Part4













OriginLab® Origin 8.1: Customizing a Graph Part5

Videotutoriales de origin, Graphing

Contour Plots and Color Mapping


Learn how to create a contour plot from a matrix data or from XYZ data, and customize the contour plot.


OriginLab® Origin 8.1: Contour Plots and Color Mapping Part1 - Create Contour Plot from a Matrix

 











OriginLab® Origin 8.1: Contour Plots and Color Mapping Part2 - Customizing a Contour Plot












OriginLab® Origin 8.1: Contour Plots and Color Mapping Part3 - Create Contour Plot from XYZ Data



viernes, 3 de septiembre de 2010

Videotutoriales de origin, Graphing

Merging and Arranging Graphs

Learn how to create a merge graph from multiple graphs, arrange layers, and display the opposite axis with nonlinear formula.


OriginLab® Origin 8.1: Merging and Arranging Graphs Part1












OriginLab® Origin 8.1: Merging and Arranging Graphs Part2













OriginLab® Origin 8.1: Merging and Arranging Graphs Part3











Creating a Graph

Learn how to create a graph using the graph toolbars or the Plot Details dialog, add data to an existing graph, and plot groups of plots by label.


OriginLab® Origin 8.1: Creating a Graph Part1 - Add Data using Drag-n-Drop










OriginLab® Origin 8.1: Creating a Graph Part2 - Create a Graph using Plot Setup












OriginLab® Origin 8.1: Creating a Graph Part 3 - Create a Multi-panel Plot by Groups

miércoles, 1 de septiembre de 2010

Videotutoriales de origin, Data Manipulation

Data Reduction


Learn how to use Origin and OriginPro 8.1 tools to perform data reduction with the following methods:

Origin - Delete Rows by Skipping, Mask and Delete Rows, Reduce Duplicate Data
OriginPro - Reduce by Group, Reduce to Evenly Spaced X, Decimation.

OriginLab® Origin 8.1: Data Reduction












Pivot Table

Learn how to use the built-in Pivot Table tool to quickly summarize data

OriginLab® Origin 8.1: Pivot Table












Setting Column Values

Learn how to set column values using values from other columns as well as from built-in functions, values contained in specific worksheet cell, or metadata stored in workbook.

OriginLab® Origin 8.1: Setting Column Values Part1











OriginLab® Origin 8.1: Setting Column Values Part2








OriginLab Origin ® 8.1: Ajuste de la columna Valores Part3













OriginLab® Origin 8.1: Setting Column Values Part4








Learn how to use the Set Column Values dialog to manipulate your data.
Set Column Values

Videotutoriales de origin, Exporting

Exporting Graphs

Learn how to use the exgraph dialog settings for vector versus raster output, and how to save settings for repeat use.

OriginLab® Origin 8.1: Exporting Graphs

Videotutoriales de origin, Importing Data

Importing Data

Learn how to import ASCII file, customize your Import ASCII dialog settings and save them for future reuse, and use the Import Wizard to import data file and customize the import settings.



OriginLab® Origin 8.1: Importing Data Part1














OriginLab® Origin 8.1: Importing Data Part2












OriginLab® Origin: 8.1Importing Data Part3




Import Filter  Learn how to create an import filter and use it to import similar files. (In the next movie, you can also embed LabTalk Script in the filter)



Script After Import  Learn how to run LabTalk Script after importing data.



Partial Import  Learn how to partially import data from other sources through the Clipboard



Import Data from a Database
  Learn how to access a database in Origin and import data.